Baumatic BCE512SS/W, User Manual, Page: 17 / 32

17
o
To activate a zone, position the
ould select a control knob
position that is suitable for the
temperature setting and 0 is off.
o
When you have finished cooking on a
particular zone, it is important to
make sure that the control knob is
turned back to 0 (the off position).
o
After a zone is switched off, the corresponding
cooking zone indicator will show a flashing letter
60°C and is therefore high enough to cause
injury.
Hob guidelines
times the hob top is used, it may give off an acrid,
burning smell. This smell will disappear completely with repeated
saucepans must be positioned exactly on
these zones for efficient heating to occur. Pans should have the
o
You should not use saucepans with rough bottoms, as this can
of the saucepans are
clean and dry.
control knob between 1 – 6.
o
You sh
particular cooking that you are
carrying out. 6 is the highest
a
Residual he t indicator
“H”. This means that the temperature of the zone
is over
o
IMPORTANT: The residual heat indicator will disappear if your
mains supply is cut.
o
The first few
use.
o
The worktop is fitted with cooking areas of different diameter
and power.
o
The positions where the heat will radiate from are clearly marked
on the hob top. The
same diameter as the cooking zone that they are being used on.
scratch the surface.
o
Before use, make sure that the bottoms