11
3.3 How To Use
3.3.1 Start Cooking
After powering on, the buzzer beeps once, all the indicators light up for 1 second then go out, indicating
that the ceramic hob has entered the state of standby mode.
Touch the ON/OFF control. All the indicators
show “-”
Place a suitable pan on the cooking zone that you wish to use.
• Make sure the bottom of the pan and the surface of the
cooking zone are clean and dry.
Select a heat setting by touching the “-” or “+” control.
• If you don’t choose a heat setting within 1 minute, the
ceramic hob will automatically switch off. You will need to start
again at step 1.
• You can modify the heat setting at any time during
cooking.
• By holding down either of these buttons, the value will
adjust up or down.
3.3.2 Finish Cooking
Turn the cooking zone off by scrolling down to “ 0 ” or touching
“-” and “+” control together .
OR
Turn the whole cooktop off by touching the ON/OFF control.
Beware of hot surfaces
“H” will show which cooking zone is hot to touch. It will disappear when the surface has cooled down
to a safe temperature. It can also be used as an energy saving function if you want to heat further pans,
use the hotplate that is still hot.
Summary of Contents for BC60CTB
Page 22: ...22...
