Gas adjustment (Conversion to LPG for the oven and grill)
All work must be carried out by a CORGI registered
engineer.
IMPORTANT: Always isolate the cooker from the electricity
supply before changing the injectors and/or adjusting the
minimum flow of the burners.
o
Remove the burner base from
the bottom of the oven.
o
Loosen the burner screw (V) and then carefully pull the burner
away from its support. IMPORTANT: Care must be taken to
ensure that no damage is caused to the ignition plug or
the thermocouple.
o
Unscrew the injector using a 10 mm spanner and replace it with
the stipulated injector for the new gas supply (see table on the
next page).
34
Summary of Contents for BC190SS
Page 1: ...KirThat 1 BC190SS 90cm Single cavity gas range cooker...
Page 42: ...42...
Page 43: ...43...
Page 44: ...44...
