14
Ensure that you have fitted the
union (‘N’) (below and to the right)
see to the upper part of the hood
using the packaged two screws
supplied inside the packing (Fig. 1
– on right). Using a 125 mm
diameter pipe, connect the union
(N) on the upper part of the hood
(see Fig. 1) to the discharge outlet
for cooking vapours with a cross-
section of at least 150 cm
²
.
PLEASE NOTE: If there is no
discharge outlet and the hood is to
be fitted to an outside wall of the
building, make a hole in the wall
that is large enough to fit a wind
and rain-proof shutter with a cross
section of at least 150 cm
²
and
connect this to the outlet union of
the unit by means of a pipe.
_____________________________________________________________________________________________________________________________________________________ _____________________________________________________________________
Extraction / Air Purifier Modes of Operation
Please note: For the extraction function, you will
need to connect a 125 mm diameter outlet chimney
to the union „N‟ in Fig. 2. This pipe is not provided
with your cooker hood. See figure on left.
N
N
