background image

 

5

Important safety information 

 

Your safety is of the utmost importance to Baumatic. 
Please make sure that you read this instruction booklet 
before attempting to install or use the appliance. If yo
are unsure of any of the information contained i
booklet, pleas

n this 

e contact the Baumatic Technical 

ent. 

e

 

 

old use and for 

o

 

in 

ient temperature of the 

 

o

 

n at 

 

o

 

 of this temperature limit, will be the liability of 

 

o

 

uarantee. The foregoing does not 

o

 

 

f Baumatic Ltd. 

 

o

 

ld not use this appliance to store items on or as a work 

 

o

 

ept away 

 

o

 

Service 

 

Departm
 

G neral Information 

This appliance is designed for domestic househ

o

the cooking and frying of domestic foodstuffs. 

 

IMPORTANT: The adjacent furniture and all materials used 
the installation must be able to withstand a minimum 
temperature of 85°C above the amb
room it is located in, whilst in use. 

Certain types of vinyl or laminate kitchen furniture are 
particularly prone to heat damage or discolouratio
temperatures below the guidelines given above. 

Any damage caused by the appliance being installed in 
contravention
the owner. 

Your new appliance is guaranteed against electrical or 
mechanical defects, subject to certain exclusions that are noted 
in Baumatic’s Conditions Of G
affect your statutory rights.

 

 

The use of this appliance for any other purpose or in any other
environment without the express agreement o
will invalidate any warranty or liability claim. 

You shou
surface. 

 

o

 

No modifications to the appliance are permitted by Baumatic Ltd. 

You should not store or place flammable or highly flammable 
liquids/materials on top of or near the appliance. Items made 
from aluminium, plastic or plastic film should also be k
from the appliance, as they may fuse to the surface. 

Repairs may only be carried out by Baumatic 
Engineers or their authorised service agent.

 

Summary of Contents for B47





























Reviews: