Baumalight Splinter RSX380 Operator'S Manual Download Page 5

^  

WARNING

Prevent death or serious injury�

Verify the Splinter is locked to excavator 

before operation or transport�

 

^  

WARNING

Protect from flying debris.

Wear proper safety glasses, goggles, 

or  a  face  shield  to  protect  from  flying 

debris�

Carefully read all safety messages in this manual 

and on equipment safety signs. Keep safety signs 

in good condition and replace missing or damaged 

safety signs.

New equipment components and repair parts must 

include the current safety decal. 

Learn how to properly operate equipment. 

NEVER operate or work around this equipment 

without proper instruction, while fatigued or under 

the  influence  of  alcohol,  prescription  or  non-

prescription medication or if feeling ill.

Keep your equipment in proper working condition.

Know the regulations and laws that apply to you 

and your industry. This manual is not to replace 

any regulations or laws. Additional information 

may be found at:  www.asae.org or www.osha.gov.

If you do not understand any part of this manual, 

contact Baumalight at 866-820-7603.

Prepare for Emergencies

• 

Be prepared in case of emergencies.

• 

Keep a fire extinguisher and first aid kit close 

to the machine.

• 

Keep emergency phone numbers close to 

your phone.

• 

Know your address so emergency services 

can locate you if an emergency arises.

Replace Safety Signs

• 

Replace missing or damaged safety signs.

• 

Safety signs are identified in Section 3 of this 

manual.

• 

Replacement safety signs are available from 
your Baumalight dealer.

Do Not Allow Riders

• 

NEVER lift or carry anyone on the Splinter.

• 

NEVER use Splinter as a work platform.

• 

NEVER allow passengers on the Splinter.

3

Summary of Contents for Splinter RSX380





















Reviews: