^
WARNING
Pressurized fluids can penetrate the
skin�
Use body and face protection while
searching for leaks� A tiny, almost
invisible leak can penetrate the skin,
thereby requiring immediate medical
attention�
Use wood or cardboard to detect
hydraulic leaks, never use your hands�
8.
Start tractor and operate all functions to
fill cylinders with oil. Spade may function
erratically until all air is purged from hydraulic
system.
9.
Check operation and verify there are no leaks.
10.
Stop tractor engine and check hydraulic oil
reservoir level. Add hydraulic oil if necessary.
Refer to your tractor operators manual for
hydraulic oil specification.
4.3 Attach Tree Spade
Note:
Use this procedure to connect to tractor
after the initial setup has been performed.
^
WARNING
To prevent injury or machine damage
put transmission in park�
Never position yourself between tractor
and tree spade�
Only experienced and properly trained
operator’s should operate the tractor
and tree spade�
^
WARNING
Pressurized fluids can penetrate the
skin�
Disconnect and lockout power source
before disconnecting and/or connecting
hydraulic hoses�
1.
Read and follow all safety instructions.
2.
Attach tree spade to tractor. See Operator’s
Manual.
3.
Verify pins are secure in the correct position.
4.
Connect hydraulic hoses. Verify hydraulic
hoses are clear of pinch areas and moving
parts.
5.
Move to a clear open area to test functions.
^
WARNING
Crushing hazard�
To prevent roll over:
•
Add the recommended ballast�
•
See your equipment operator’s
manual for ballast recommendations�
4.4 Electrical Connections
(If Equipped)
1.
Connect electrical harness to connector on
tree spade.
11