Baumalight DSA530 Operator'S Manual Download Page 8

Avoid Wood Dust Inhalation

^

 WARNING

Drilling, sawing, sanding or machining 

wood products can expose you to wood 

dust, a substance known to the State of 

California to cause cancer�  

Avoid inhaling wood dust or use a dust 

mask or other safeguards for personal 

protection�  For more information go to 

www�P65Warnings�ca�gov/wood�

^

 WARNING

Wear an approved dust mask or 

respirator�

Follow local, state and federal 

regulations�

Avoid High Pressure Fluids

^

 

WARNING

Pressurized  fluids  can  penetrate  the 

skin�

Hydraulic hoses can fail from age, 

damage and exposure�

Use body and face protection while 

searching for leaks� A tiny, almost 

invisible leak can penetrate the skin, 

thereby requiring immediate medical 

attention�

Use wood or cardboard to detect 

hydraulic leaks, never use your hands�

Escaping fluid under pressure can penetrate the 

skin causing serious injury.
Prevent the hazard by relieving pressure (See skid 

steer Operator’s Manual.) before connecting or 

disconnecting hydraulic lines. Verify all connections 

are tight before applying pressure.
Search for leaks with a piece of cardboard or wood.

Protect hands and body from high pressure fluids. 

If an accident occurs, see a doctor immediately. 

Any fluid injected into the skin must be surgically 

removed within a few hours or serious infection 

may result.

6

Summary of Contents for DSA530





























Reviews: