Baumalight DR444, Operator'S Manual, Page: 17 / 28

10.
Lift tree out of ground and tilt tree spade back.
11.
Move away from hole.
^
WARNING
Moving parts can crush and cut�
Keep clear of moving components�
Lockout operating unit before leaving
operators seat�
12.
Lower tree spade to ground, set parking brake,
stop engine and remove key.
13.
Cut any protruding roots.
4.9.1 Planting A Tree
1.
Position tree above hole.
2.
Tilt and lower the tree spade so that the tree
fits into the hole.
3.
Retract spades.
4.
Raise tree spade off ground a few inches.
5.
Open swing hinge(s).
6.
Back away from the tree.
4.9.2 Basketing A Tree
It is recommended that you basket the tree in the
hole it was removed from. The tree will be more
stable in a hole in a basket than sitting on top of
the ground.
Most baskets are flat on the bottom. To get a flat
cone, you can slightly retract each spade. You
must remove the dirt tip. This will make the root
ball fit the basket.
15