background image

BAUMALIGHT ATTACHMENT WARRANTY

This product is warranted to be free of defects in materials and workmanship under normal use and 

service, for a period of one year from the date of purchase. This warranty covers parts and labor, but does 

not cover misuse, negligence or dealer travel time.

Replacement of individual parts vs. assemblies are at the discretion of the manufacturer.

Baumalight products when purchased new are automatically registered for warranty on the date of 

purchase. 

Warranty claims must include the bill of sale to the original purchaser. 

This product must be operated and maintained in accordance with the Operating and Maintenance 

Instructions supplied with this unit.

Under no circumstances will the manufacturer be liable for any consequential damage or expense of any 

kind, including loss of profits.  The manufacturer is under no circumstances liable for carrier unit damage 

of any kind. The manufacturer is not liable for the maintenance of the product.

This warranty is extended only to the original purchaser and there never is any warranty on anything sold 

through auction. 

Units are to be returned at the customer’s expense to the nearest Authorized Service Center. Damage in 

transit is not covered by warranty.

The work may be performed by the end user, if they are a qualified mechanic.

The Manufacturer’s Liability is limited to repair of the product and/or replacement of parts and is given to 

the purchaser in lieu of all other remedies including incidental and consequential charges.  There are no 

warranties, expressed or implied other than those specified herein.  For the nearest Authorized Service 

Center call the manufacturer.

Model Number: ___________     S/N:_______________
Date of Purchase: _____________     Owner’s Name__________________________________ 

17

Summary of Contents for CF772





















Reviews: