33
Draining Residual Water
Before emptying the
residual water, switch the
appliance off and unplug it
from the mains socket.
(Proceed to point A or B
depending on the model)
A. The residual water drain
hose is located in the
base of the appliance.
1.
Remove the plinth cover.
The thin side of the coloured
insert from the detergent
drawer can be used for this.
2.
Grasp the cap and pull out
together with the hose.
Place a low tub or container
beneath it. Pull off cap from
end of hose.
3.
Drain the water into a low
container until no more
water flows out. Then close
the residual water drain hose
and insert it again.
Before using the washing
machine again:
1.
Pour approx. 1 litre of water
into the detergent drawer to
reactivate the Eco system.
2.
Reinsert the plug in the
socket.
B. If there is no residual
water drain hose in the
base of your appliance,
open the filter cover. Do
this with the aid of the
coloured insert from the
detergent container. Place
a container beneath it.
1.
Open the filter but do not
withdraw it completely.
Turn the filter slowly anti-
clockwise until water flows
out.
2.
Wait until all the water has
drained off.
3.
Now unscrew the filter
completely and remove it.
4.
Tilt the appliance forwards
carefully to allow the water
to flow out.
5.
Insert the filter with the
guide pin upwards and
screw it in clockwise to the
stop (horizontal handle).
6.
Fold the cover up and lock it.
Before restarting the
washing machine:
1.
Pour about 1 litre of water
into the detergent drawer to
reactivate the Eco system.
2.
Reinsert the plug in the
socket.