10
TROUBLESHOOTING GUIDE
1. The appliance is not working.
Is there a power failure?
Has the main switch been turned on?
Has the fuse blown?
Is the thermostat setting correct?
Was the appliance switched on correctly?
2. Excessive frost forms inside the appliance.
Has the defrost water drain been repositioned
correctly?
Is the door shut properly?
3. The yellow, red and green leds do not light
up. Perform the checks for problem 1),
and then:
Contact After-Sales Service.
Notes:
The front edge of the appliance may be
hot. This prevents the formation of
condensation and is not a defect.
Gurgling and hissing noises due to
expansion in the refrigerant circuit are
normal.
AFTER-SALES SERVICE
Before contacting After-Sales Service:
1.
See if you can solve the problem yourself with
the help of the Trouble-shooting guide.
2.
Switch the appliance on again to see if the
problem has been solved. If it has not,
disconnect the appliance from the power
supply and wait for about an hour before
switching on again.
3.
If the problem persists after this course of
action, contact After-Sales Service.
Specify:
the nature of the problem,
the model,
the Service number (the number after the word
SERVICE on the data plate on the inside of the
appliance),
your full address,
your telephone number and area code.
Note:
The direction of door opening can be changed.
If this operation is performed by After-Sales
Service it is not covered by the warranty.
6gb33034.fm Page 10 Thursday, July 25, 2002 11:50 AM
