34
Removal and
rearrangement of
the refrigerator and
freezer shelves
The shelves may be
positioned to suit your
particular requirements.
The glass shelves are strong
enough to hold bottles, milk
cartons and heavy food;
nonetheless, avoid banging
these down on the shelves.
To remove the shelves:
Slide the shelf out until it
stops, then lift it up and
remove it.
Removal of the fruit
and vegetable
drawer or the meat
drawer:
Slide the drawer out until it
stops;
With one hand underneath
the drawer, lift it and pull it
out;
The drawer will come out
of its runners and can be
pulled out further;
To remove completely, the
drawer will need to be
rotated: front end up, back
end down.
To remove the glass
cover of the drawer
Lift the front of the frame
10 cm, then with your other
hand, lift the back of the
frame and pull it out.
To replace the glass
cover of the drawer
Insert the back of the frame
in the supports on the
refrigerator walls and
lower it back into place.
Meat drawer
temperature control
The cold air flows into the
meat drawer through an
opening between the
refrigerator and the freezer
compartment. In this way
the temperature inside the
meat drawer is lower than
in other parts of the
refrigerator. Set the slider
for higher or lower airflow.
If you wish to store
vegetables in the meat
drawer, move the control
all the way to the left to the
vegetables setting. This
avoids possible frost
damage to the vegetables.
4gb33015.fm Page 34 Wednesday, March 10, 2004 4:02 PM
Summary of Contents for KSDN 5061/A
Page 2: ......