GB
FRESH CONTROL COMPARTMENT UNBLOCK
Press the both locks (1), pull the drawer out (2).
REPLACING THE LIGHT BULB
Always disconnect the refrigerator from the power supply
before replacing any light bulbs.
If the inside light is not working:
• Remove the light cover using a small screwdriver. Put
the tip of screwdriver into upper rectangular hole,
press down the catch for unblock and pull cover
towards outside.
•
Check the bulb and if necessary replace it.
• Pull the bulb towards the outside of the lamp holder.
Put the new one pushing connectors to the sockets of
lamp holder. It is used a special bulb, which does not
unscrew. This bulb is available only from our After-
sales Service. Replace using maximum 15W bulb.
•
Assembly again the light cover pushing in its place, hearing
“click effect”. Do not leave uncovered the bulbs.
Warning:
After removing the light cover in order to cleaning, unplug the
appliance at first. Use only slightly wet washcloth. Do not
touch the bulbs. Keep special precautions.
5019 437 01014
Summary of Contents for KGNA 336 OPTIMA
Page 6: ......