
5019 637 01004
REPLACING THE LIGHT BULB
Always disconnect the refrigerator from the power supply before replacing any light bulbs.
If the inside light is not working:
•
Remove the light cover using a small screwdriver. Put the tip of screwdriver into upper rectangular hole, press
down the catch for unblock and pull cover towards outside.
•
Check the bulb and if necessary replace it.
•
Pull the bulb towards the outside of the lamp holder. Put the new one pushing connectors to the sockets of lamp
holder. It is used a special bulb, which does not unscrew.
This bulb is available only from our After-sales Service. Replace using maximum 15W bulb.
•
Assembly again the light cover pushing in its place, hearing “click effect”. Do not leave not covered bulbs.
Warning:
After removing the light cover in order to cleaning, unplug the appliance at first. Use only slightly wet washcloth. Do
not touch the bulbs. Keep special precautions.
FRESH CONTROL COMPARTMENT
UNBLOCK
Press the both locks, pull the drawer out.