Bauknecht GSF Primeline 6 Quick Reference Manual Download Page 4

5019 496 01534

GB

Quick Reference Guide

Before using the dishwasher, read the user instructions!

BK/I/B/GB

(We reserve the right to make technical modifications)

GSF Primeline 6

Add regeneration salt

Only add regeneration salt immediately before 
starting a wash programme.

Add rinse aid

Time and failure display

Indicates in hours the time remaining until the start 
of the wash cycle. Switches off when the 
programme starts and indicates the time remaining 
in hours and minutes.
“F....” Identification of faults for service technician

“Delayed start” button

The wash cycle can be programmed to start after 
1 - 24 hours. With each successive touch of the button, 
the delayed start indicator increases by 1 hour, and 
after 24 returns to 00. Then press the Start button. 
The dishwasher will start at the set time.

Antibacterial rinse

4) 5)

This function adds an antibacterial rinse at the end of the 

wash cycle, thereby guaranteeing a perfectly clean and 
sanitized load. The lamp will light up when the function is 
activated. If the temperature is not maintained during 
the antibacterial cycle (e.g. if the door is opened and 
remains open for a long time), the lamp will start blinking 
to indicate that sanitation is not guaranteed.

1)

Reference programme for energy label EN 50242;

2)

Refer to “User instructions”;

3)

The data relevant to programmes are values obtained in the 
laboratory in conformity with Standard EN 50242.  In practice 
there may be time variations or leaps depending on different 
loads, function options, sensor calibration (only for sensor-
controlled programmes) water temperatures or hardness and 
different power supply voltages.

4)

The bacteria removal efficiency has been tested by the Institut 
Pasteur de Lille (France), based on the NF EN 13697 standard 
of November 2001.

5)

These programmes can be used with the Antibacterial rinse option.

Programme selector knob

On / Off button

Start button

Switches “on” when the dishwasher is operating. 
Flashes when a fault occurs. Switches off at the end 
of the programme.

Indicators

Options

3)

Programme chart

Detergent

2)

Consumption

3)

Programmes

Loading instructions

A

B

Litres

kWh

Minutes

AutoSensor

5)

50-65°C

Automatic programme 
recommended for routine washes, 
with  no dried-on or burnt food (not 
for EN 50242).

X

X

13-19 1.15-1.50 100-130

Pre-Rinse

cold

Crockery to be washed later.

-

-

5.0

0.02

10

Glasses

40°C

Light soiling, for example glasses and 
cups.

X

-

13.0

0.90

97

Rapid 30 min

40°C

Lightly soiled crockery with no 
dried-on food.

X

-

13.0

0.70

30

Eco

1) 5)

50°C

Normally soiled crockery.

X

X

16.0

1.05

170

Intensive

5)

70°C

Recommended programme for 
heavily soiled crockery, especially 
suitable for pans and saucepans.

X

X

17.0

1.65

145

Important information for Test Laboratories:
For detailed information on the EN comparison test and other tests, contact the following address: “[email protected]”.

Summary of Contents for GSF Primeline 6

Page 1: ... will light up Select the desired programme using the specific button or knob The corresponding indicator lamp lights up If necessary and if provided The corresponding indicator lamp lights up The selected programme is then memorised even in the event of power failure Only open the dishwasher if necessary Warning beware of hot steam If the appliance is switched off during a wash cycle when switche...

Page 2: ... to provide clearance for large items of crockery in the bottom rack Open the rack guide retainers F on the right and left and remove the top rack When the upper rack is in place the retainers must always be closed Lower rack Depending on the model with fixed or tilting plate holders G Half Load Load the lower rack see description of Options Greater washing power particularly for plates and saucep...

Page 3: ...ry clean Filters incorrectly assembled Insert the filter correctly Colour of plastic parts faded Tomato carrot juice Depending on the material if necessary use a detergent with a greater whitening power Deposits on crockery Removable Streaks on the crockery glasses Increase the rinse aid dosage Streaks on glasses Reduce the rinse aid dosage Layer of salt on crockery glasses Close the salt containe...

Page 4: ...mmes are values obtained in the laboratory in conformity with Standard EN 50242 In practice there may be time variations or leaps depending on different loads function options sensor calibration only for sensor controlled programmes water temperatures or hardness and different power supply voltages 4 The bacteria removal efficiency has been tested by the Institut Pasteur de Lille France based on t...

Reviews: