2
INSTALLATION
PRIOR TO CONNECTING
Ensure that the appliance is not damaged.
Check
that the oven door closes firmly against the
door support and that the internal door seal is
not damaged. Empty the oven and clean the
interior with a soft, damp cloth.
AFTER CONNECTING
The earthing of this appliance
is compulsory. The
manufacturer will accept no responsibility for
injury to persons, animals or damage to ob-
jects arising from the non-observance of this
requirement.
The manufacturers are not liable for any
problems caused by the user’s failure to ob-
serve these instructions.
Do not operate this appliance
if it has a damaged
mains cord or plug, if it is not working proper-
ly, or if it has been damaged or dropped. Do
not immerse the mains cord or plug in water.
Keep the cord away from hot surfaces. Electri-
cal shock, fire or other hazards may result.
Do not remove the microwave inlet protection
plates
located on the side of
the oven cavity wall. They
prevent grease & food par-
ticles from entering the mi-
crowave inlet channels.
Ensure
the oven cavity is
empty before mounting.
Check that the voltage
on the rating plate corre-
sponds to the voltage in your home.
The oven can be operated only
if the oven door is
firmly closed.
MOUNTING THE APPLIANCE
Follow the supplied
separate mounting in-
structions when installing the appliance.
Do not use extension cord:
If the power supply cord is too short,
have
a qualified electrician or serviceman in-
stall an outlet near the appliance.
