3. Multiple zone function
This function switches on the outer rim of the hotplates as well (if available) meaning larger pots can be used
with more optimum distribution of the heat provided by the element below the cooking zone.
Enabling and removing the multiple zone function
Press the
key to enable this function. It applies to cooking zones only, if available. This function can be
selected at any level and with any of the special functions enabled. Press the
and
keys at the same
time to remove it.
4. FAST BOILING FUNCTION
The fast boiling function sets the cooking zone at a hotter temperature than level 9 for short periods. Water
can be boiled in less time with this function.
Enabling and removing the fast boiling function
The function can be set for all cooking zones switched on by pressing the
key. To remove this function,
press the
key for the required zone to lower the power level or press the
and
keys at the
same time.
5. Time switch function
The time switch function can be used as a short-time alarm with no association to any specific cooking area,
or it can be allocated to a selected zone and the relative operation programmed.
Enabling and removing the time-switch function
To use the time-switch function as a short-time alarm, press the
key on the special functions bar.
Press the
and
keys on the timer bar to set the time. You can set times of up to 99 minutes. When the
set time elapses, a long beep sounds. To switch the buzzer off, press
.
To use the time-switch function and set the time a cooking zone should switch off at, a power level or the
fast boiling / gentle heat functions must be set for the relative cooking zone.
When you press the time-switch key, the time bar display starts to flash. By pressing the
or
keys to
select a cooking zone, one of the dots at the four corners of the timer display lights up to indicate the zone
selected. Use the
and
keys on the timer bar to set the required time. The display will stop flashing
after a few seconds meaning the selected cooking zone has been correctly programmed.
Another cooking zone can now be programmed. The timer can be set separately for each of the cooking
zones.
The relative dots light up at the corners of the timer bar display to indicate which cooking zones the timer
has been set for.
The shortest time set is usually shown. When you select a cooking zone, the timer bar display shows the
time set for that zone. To disable the timer for a cooking zone, press the
and
keys at the same time.
