Bauknecht CTDI K 840C NE, Instructions For Fitting And Use, Page: 39 / 120

Appliance description
39
GB
3.1 Operating the hob with the sensor keys
The glass ceramic hob is operated with touch control sen-
sor keys. The sensor keys are operated as follows: lightly
touch a symbol on the surface of the ceramic glass plate. A
buzzer will indicate when the controls have been operated
correctly.
The touch control sensor key will then be indicated as
“key”.
Standby key (13)
This key is used to switch the entire hob operational. It is,
as it were, the main switch. When the hob has been swit-
ched off with this key, it will remain on standby for approx.
another 120 min.
Attention! The residual heat indicator will no longer operate
when the appliance has completely switched off .
ON/OFF key (7) Cooking zones left or right
This key is used to switch the respective cooking hob side
left or right on and off .
Cooking zone selection key; e.g. front (8)
Pressing one of the cooking zone selection keys available
will select a cooking zone, for which the Plus key or the
Minus key may be used to set the cooking level.
Minus key / Plus key (10)
These keys are used to set the cooking levels, the auto-
matic switch-off device and the minute minder.
The Minus key reduces the setting and the Plus key raises
it.
Power setting display (11)
The power setting indicator shows the power setting which
has been selected, or:
lights up brightly Cooking zone has been selected
........................................... Residual heat
........................................... Power boost
............................................ Locking
........................................... Bridging function
ER03 ..................................... Error message
Control lamp .................. Timer function
Minus key /Plus key Ventilation (14)
These key are used to operate the fan (extractor fan). It
can be operated independently of the hob.
Fan indicator (15)
.................Fan setting
................Fan time lag