Bauknecht BIK5 DP8FS2 ES, Manual

Page: 22 / 84

MAINTENANCE AND
CLEANING
EXTERIOR SURFACES
. Clean surfaces with a damp microfibre cloth. If
they are very dirty, add a few drops of pH-neutral
detergent.
Finish off with a dry cloth.
. Do not use corrosive or abrasive detergents. If any of
these products inadvertently comes into contact with
the surfaces of the appliance, clean immediately with
a damp microfibre cloth.
INTERIOR SURFACES
• After every use, leave the oven to cool and then
clean it, preferably while it is still warm, to remove any
deposits or stains caused by food residues To dry any
condensation that has formed as a result of cooking
foods with a high water content, let the oven to cool
completely and then wipe it with a cloth or sponge.
• If there is stubborn dirt on the interior surfaces, we
recommend running the automatic cleaning function
for optimal cleaning results.
• . Clean the glass in the door with a suitable liquid
detergent.
• . The door can be easily removed and refitted to
facilitate cleaning of the glass
WWW
.
ACCESSORIES
Soak the accessories in a washing-up liquid solution
after use, handling them with oven gloves if they
are still hot. Food residues can be removed using a
washing-up brush or a sponge.
CLEANING THE COOKING COMPARTMENT WITH THE PYRO CYCLE
This function enables you to eliminate cooking
spatters using a high temperature. At this
temperature, food residues turn into deposits that can
be easily wiped away with a damp sponge once the
oven has cooled down.
If the oven is installed below a hob, make sure that
all the burners or electric hotplates are switched off
while running the self-cleaning cycle.
For optimum cleaning results, remove excessive
residuals inside the cavity and clean the inner door
glass before using the Pyro function.
The oven has two different pyrolytic cleaning
functions:
the standard cycle (PYRO) provides thorough cleaning
if the oven is heavily soiled, while the economic cycle
(ECO) is shorter and consumes less energy than the
standard cycle, which makes it suitable for use awt
regular intervals.
Only run the Pyro function if the appliance contains
heavy soiling or gives off bad odours during cooking.
Please note: The oven door cannot be opened while
pyrolytic cleaning is in progress. It will remain locked until
the temperature has returned to an acceptable level. Air the
room during and after running the Pyro cycle.
REPLACING THE LIGHT
1. Disconnect the oven from the power supply.
2.
Unscrew the lamp cover, replace the bulb, and
screw the lamp cover back on.
3.
Reconnect the oven to the power supply.
Please note: Only use 20 -40W/230 V type G9, T300 °C
halogen lamps.
The bulb used in the product is specifically designed for
domestic appliances and is not suitable for general room
lighting within the home (EC Regulation 244/2009).
Light bulbs are available from our After-sales Service.
- If using halogen bulbs, do not handle them with your bare
hands as your fingerprints could cause damage. Do not use
the oven until the light cover has been refitted.
Make sure that the appliance has
cooled down before carrying out
any maintenance or cleaning.
Do not use steam cleaners.
Do not use wire wool, abrasive
scourers or abrasive/corrosive
cleaning agents, as these could
damage the surfaces of the
appliance.
Use protective gloves during all
operations.
Disconnect the oven from the
power supply.
Do not touch the oven during the Pyro cycle. Keep children and animals away from the oven
during and after running the Pyro cycle (until the
room has finished airing).
Download the Use and Care Guide from
docs . bauknecht . eu
for more information
WWW