EN-13
TROUBLESHOOTING
Problem
Possible cause
solution
1. product does not start
1.1 not connected to power supply
1.2 product no switch on
1.3 power cord or plug is defective
1.4 other electrical defect to the
product
1.1 connect to power supply
1.2 switch ON
1.3 check by a specialist
electrician
1.4 check by a specialist
electrician
2. product does not reach
full power
2.1 extension cord not suitable for
operation with the product
2.2 power source has too low
voltage
2.1 use a proper extension cord
2.2 connect to another power
source
3. fasteners jam in tool
3.1 wrong size fasteners
3.2 driver channel worn
3.3 bent fasteners
3.4 loose magazine/nose screws
3.5 broken/chipped driver
3.1 use only recommended
fasteners
3.2 replace nail / staple
3.3 discontinue using these
fasteners
3.4 tighten all screws
3.5 replace nail / staple
ENVIRONMENTAL PROTECTION
Waste electrical products must not be disposed of with household waste. Please recycle where
facilities exist. Check with your Local Authority or retailer for recycling advice.
Summary of Contents for PCT162
Page 1: ...ORIGINAL INSTRUCTION MANUAL PCT162 50W STAPLER GUN...
Page 6: ...EN 6 4 5 1 2 3 6 7 8...
Page 7: ...EN 7 A1 A2 A3 A4 A5 B C D...
Page 16: ......
