Bauhn HE215041 Getting Started Manual Download Page 1

Page: 1 / 2

UNPACK

Unpack your Smart Home Control Pack and check you have all the components:

• IR / RF Wi-Fi Controller

• Power Adapter

• Micro USB Cable

• RF Remote Control (batteries

included)

• 4 x Indoor Remote Controlled

Power Points

• Instruction Manual

• Getting Started Guide

• Warranty Card

Model Numbers: HE215041

GETTING STARTED GUIDE

SMART HOME CONTROL PACK

smart power

SETTING UP THE RF POWER POINTS

1. Remove the tab from the rear of the remote control to activate the batteries.

2. Connect the device you wish to control to the socket of your power point controller.

3. Insert the Power Point Controller into any power outlet.

4. Turn on the power outlet. The LED on the Power Point Controller will begin to flash slowly.

5. Using the remote control, press the ON button next to the number you wish to assign the

Power Point Controller to.

6. Repeat steps 2-5 to pair remaining Power Point Controllers.

Note - The ON button will only need to be pressed once for successful pairing.

2.2

2.3

2.5

Summary of Contents for HE215041

Page 1: ...TS 1 Remove the tab from the rear of the remote control to activate the batteries 2 Connect the device you wish to control to the socket of your power point controller 3 Insert the Power Point Control...

Page 2: ...into the power adaptor then connect to a power outlet and switch on Ensure the blue LED on the IR RF Wi Fi Controller is flashing rapidly at about 5 6 times per second 3 Pair Controller Making sure yo...