12
After Sales Support
TEL: 1300 886 649
4.4.1 OAD
This function can upgrade the software through signal lines from the cable.
1) Input the frequency value and download PID, and select bandwidth.
2) Select OAD option, press OK button to start upgrade.
4.4.2 Manual Search
If any channel is missing after auto search, or you want to add newly launched channels, you can use
Manual Search to scan the desired channels.
When move cursor to Channel,press OK the channel number list will appear . Select up/down to
choose the number in both cases you need search by manual scaning, besides, the Frequency below
number in both cases will change according to your selection. After selection, you can choose “Start”
to start channel scaning. Move the cursor to Frequency, press OK button to confirm, then press left/
right button to clear original frequency, next input your inquired frequency, last select“Start”to start
channel scaning.
4.4.3 Auto Search
Auto search is a kind of intelligent and convenient mode of programs searching, which covers
programs of all frequency points of target countries or regions.
1. Enter the Auto search menu via Installation > Auto Search, Press OK to start Auto Search.
2. After entering into auto search page,system will scan all programs one by one under frequency
points of current countries or regions selected automatically. Note if you exit before auto search
is not completed, you may not have received all channels.
3. During scanning, press EXIT key to stop and exit scanning.
4. If any program is detected and the scanning process is finished, system will exit the scanning
page and save the program, at the same time return to the “installation menu”
