20
1300 886 649
Model: ASB-0119 Product Code: 64259 01/2019
www.tempo.org
AUS
General Operation
Standby/ON
• When you first connect the main unit to the mains socket via the AC adapter (plug in
the DC connector of the adapter to the DC input port of the speaker first, and then
plug the adapter to the mains power supply), the main unit will be in Standby mode.
• Press the
POWER
button on the unit or the remote control to switch the unit ON.
• Press and hold the
POWER
button again to switch the unit back to Standby mode.
The power indicator will light up
red
.
• Disconnect the AC adapter from the mains socket if you want to switch the unit OFF
completely.
• When there is no input signal (or weak input signal) in HDMI, AUX, Optical and
Bluetooth
mode (Stop or Pause) for more than 15 minutes, the unit will automatically
switch to Standby mode.
Mode Selection
• Press the
MODE
button repeatedly on the unit to switch between HDMI (ARC), AUX,
USB, Optical and
Bluetooth
modes, or use the remote control to select the mode
directly.
• In AUX mode: the status indicator lights up
orange
.
• In USB mode (when USB drive is connected) the status indicator flashes
orange
.
• In HDMI (ARC) mode: the white status indicator flashes.
• In Optical mode: the status indicator lights up white.
• In
Bluetooth
mode: the status indicator lights up
blue
. It flashes when the unit is in
pairing mode.
Volume Adjustment
• Press the
VOL+ / VOL-
buttons on the unit or on the remote control to adjust the
volume.
• If you wish to turn the sound off, press the
MUTE
button on the remote control. Press
this button again or press the
VOL+ / VOL-
buttons to resume normal listening.
• While adjusting the volume, the status indicator flashes quickly.
• If you press the
VOL+ or
VOL-
button, the status indicator flashes once.
Preset Sound Effect Selection
• Press the
EQ
button on the remote control to select between preset equalisers:
Standard, Movie (recommended for viewing movies), Music (recommended for
listening to music).
Instructions