General Safety Warnings
GENERAL SAFETY WARNINGS
For the safety of yourself and others, follow all instructions and take notice of all
the warnings. When adhered to, these safety precautions can reduce the risk of
fire, electric shock and injury.
This product complies with Australian Safety standard AS/NZS 3105 to ensure the
safety of the product.
The RCM is a visible indication of a product’s compliance with all
applicable ACMA regulatory arrangements, including all technical and
record-keeping requirements.
IMPORTANT
• Damage:
If the product or cord is
damaged, contact the After Sales
Support line for advice. Do not attempt
to open the board or replace the
cord. The cord must be replaced by
appropriately qualified personnel.
• Repair:
If the product requires repair,
contact the After Sales Support
line; never disassemble or modify
the product or attempt to service it
yourself.
• Run the power supply cord in such a
way that there will be no risk of anyone
pulling it inadvertently or tripping
over it.
• The product is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been
given supervision or instruction by a
person responsible for their safety.
• Young children should be supervised
to ensure they do not play with the
product. Close supervision is always
necessary when any appliance is used
by or near children.
• The product is not suitable for use in
locations where children are likely to
be present.
• The product is designed for indoor use
in dry places only.
• Do not exceed a maximum loading of
2400 watts.
• For safety reasons, always use earth
connections.
• Only use the product with the power
supply cord fully unwound.
• Before installing the product, make
sure to place it away from: heat
sources, radiators or other products
that produce heat; areas with high
temperatures, high humidity or direct
sunlight; excess dirt and dust; open
windows and any place where water
may get to the unit.
• Do not immerse the cord, plug or the
product in water or other liquid, or
expose the electrical connections to
water or other liquid.
•
Unpack the product and keep
the original packaging carton and
materials in a safe place. It will help
prevent any damage if the product
needs to be transported in the future,
and you can use it to store the product
when it is not in use.
•
The product should always be
repacked in its original packaging
whenever transporting to prevent any
possible damage to the product.
•
When not in use:
Disconnect from
the power source and store in a cool,
dry and well ventilated location out
of direct sunlight, and not subject to
humidity.
•
Warning:
Discard this product if the
supply cord is damaged.
•
Warning:
The socket outlet should
be located near the equipment and
should be easily accessible.
Responsible disposal of the product
At the end of its working life, do not throw
this product out with your household
rubbish. An environmentally friendly method
of disposal will ensure that valuable raw
materials can be recycled. Contact your
local authority for your nearest recycling
centre. Electrical and electronic items contain
materials and substances which, if handled
or disposed of incorrectly, could potentially
be hazardous to the environment and human
health.
Responsible disposal of the packaging
The packaging of the product has been
selected from environmentally friendly
materials and can usually be recycled. Please
ensure these are disposed of correctly. Plastic
wrapping can be a suffocation hazard for
babies and young children, please ensure all
packaging materials are out of reach and are
safely disposed of. Please ensure they are
offered for recycling rather than throwing
these materials away.
Cleaning the product
Only use a soft, dry cloth for cleaning the
product; do not use a damp cloth. Never
clean with industrial strength polish, wax,
benzene, paint thinner, air freshener,
lubricant, detergent or other chemicals. Wipe
off any moisture, dirt or dust on the power
sockets and plug pins with a clean, dry cloth.
Specifications
Input
AC 100-240V, 50/60Hz
Max. Power Load
2400W
Wireless Charger Output
10W Max.
USB-A Output
5V DC, 2A Max.
USB-C Output
5V DC, 2A Max.
USB-A + USB-C Output
DC 5V, 3.4A Max.
Mass
400g (approx.)
Dimensions (W x H x D)
92 x 71 x 99 mm
