10
1300 886 649
Model: AACBL-415 Product Code: 49737 04/2015
www.tempo.org
AUS
Instructions
Setting the Alarm
You can set two alarms that go off at different times.
NOTE:
Before setting the alarm, ensure that the clock is set correctly.
1.
Press and hold the
ALARM
[
1
or
2
] button on remote control in standby
mode for a few seconds and the hour digits will flash.
2.
Press the
/
buttons on the remote control to set the required hour. Then
press the
ALARM
[
1
or
2
] button to confirm the hour. The minute digits will
start flashing.
3.
Press the
/
buttons on the remote control to set the required minute.
Then press the
ALARM
[
1
or
2
] button to confirm the minute. The alarm
time will now be set.
4.
Press the
/
buttons on the remote control to select an alarm sound
source: iPod/iPhone, FM tuner or buzzer. Then press the
ALARM
[
1
or
2
]
button to confirm.
NOTE
: If FM mode is chosen, the alarm will play the last played station.
5.
Press the
/
buttons on the remote control to select the required volume,
we recommend no less than 5 as a minimum. Then press the
ALARM
[
1
or
2
] button to confirm.
Your Alarm is now set, and either
or
will be displayed.
Activate and Deactivate the Alarm
• If an Alarm is set, press the
ALARM
[
1
or
2
] button twice on the remote to
activate or deactivate the timer.
• If the alarm is activated
or
is displayed.
• If the alarm is deactivated, the
or
will disappear from the display
on the front of the unit.
Snooze Alarm
When the alarm sounds, you can stop it temporarily by pressing the
SNOOZE
button. The display will show the SNOOZE indicator and the relative alarm
or
will be flashing.
•
T
he alarm will be delayed for 9 minutes and then start again.
•
This
manual snooze operation can be repeated again and again.
• If the alarm is set in FM mode, snoozing will reactivate FM after 9 minutes
