v
1300 886 649
Model: ATV60UHD-0717 Product Code:
58690
07/2017
www.tempo.org
AUS
Remote Control (Cont.)
Using the remote control
Inserting batteries
To install the batteries, proceed as follows:
• Open and remove the cover on the back of the
remote control.
• Insert two AAA size batteries according to the polarity
markings (+ / -) inside the compartment. Make sure
the batteries are correctly aligned and properly
pushed into place so they can power the remote
control unit.
• Slide the back cover back into its closed position.
NOTE:
When testing the remote control unit after
replacing the batteries, make sure the TV is
properly connected to the mains power supply.
Battery service life
• The service life of batteries depends on usage and
environmental conditions. They should normally last
for about one year.
• If the remote control fails to work even when it is
operated near the TV, replace the batteries.
Precautions when using batteries
• Do not use old and new batteries together.
• Do not use different types of battery (for example,
Manganese and Alkaline batteries) together.
• Note that there are chargeable and non-chargeable
batteries. Do not attempt to charge non-chargeable
batteries.
• Remove the batteries from the remote control unit if
you do not intend to use the unit for a long time.
• When discarding used batteries, follow any guidelines
for recycling and disposal of batteries that apply in
your local area.
• Keep batteries away from children and pets.
• Never throw batteries into a fire or expose them to fire
or other sources of extreme heat.
