Page 12
For technical questions, please call 1-888-866-5797.
Item 58520
RETURNS NOT ACCEPTED & WARRANTY VOID
if Sprayer is not properly cleaned and lubricated immediately after every use.
Clean and lubricate Sprayer immediately to prevent permanent damage.
SAFETY
O
PERA
TION
M
AINTENANCE
SETUP
Cup Support Adapter
To prevent tipping when using large battery, attach
Cup Support Adapter to bottom of Paint Cup.
Filling Paint Cup
WARNING! TO PREVENT SERIOUS INJURY: Only water-based materials or materials with
a minimum flash point of 38°C (100°F) should be used for spraying and cleaning.
Only use
water or mineral spirits for cleaning. Only use water-based or oil-based paint for spraying.
1. Remove Paint Cup and insert clean Cup Liner.
2. Pour paint into Cup Liner.
3. Replace Paint Cup, tighten securely.
4. Open
Air Bleed Valve
, squeeze Liner until
reservoir inside Air Hole is filled with paint.
5. Close
Air Bleed Valve.
Air Bleed
Valve
Air
Hole
6. Spray according to
Spraying on page 13.
NOTE: Dispose of solvent, paint and waste
according to local hazardous waste standards.
Cup
Support
Adapter
Paint
Cup
