Page 10
For technical questions, please call 1-888-866-5797.
Item 58253
SA
FE
TY
OP
ERA
TI
O
N
MAINT
ENANC
E
SE
TUP
Circle Cutting
Use the center hole in the Fence as a
pivot point when cutting circles.
1. Install the Fence as shown in
Figure C
.
2. Set the distance from the center hole in the
Fence to the far edge of the router bit equal to
the radius of the circle. Lock the Fence in place
with the Attachment Knob and Wing Nut.
3. Align the center hole in the Fence with
the center point of the circle.
4. Drive a nail through the center hole
to secure the Fence in place.
Fence
Attachment
Knob
Center
Hole
Fence
Bracket
Wing
Nut
Figure C: Fence Installation for Circle Cutting
Workpiece and Work Area Set Up
1. Designate a work area that is clean and well lit.
The work area must not allow access by children
or pets to prevent distraction and injury.
2. Route the power cord along a safe route to reach
the work area without creating a tripping hazard or
exposing the power cord to possible damage. The
power cord must reach the work area with enough
extra length to allow free movement while working.
3. Secure loose workpieces using a vise or clamps
(not included) to prevent movement while working.
4. There must not be objects, such as utility lines,
nearby that will present a hazard while working.
