Page 4
For technical questions, please call 1-888-866-5797.
Item 63438
S
AFET
y
Op
ERA
TION
M
AINTENAN
c
E
S
ETU
p
power tool use and care
1.
Do not force the power tool. Use the
correct power tool for your application.
7KHFRUUHFWSRZHUWRROZLOOGRWKHMREEHWWHUDQG
safer at the rate for which it was designed.
2.
Do not use the power tool if the Trigger
does not turn it on and off.
$Q\SRZHUWRROWKDWFDQQRWEHFRQWUROOHGZLWKWKH
7ULJJHULVGDQJHURXVDQGPXVWEHUHSDLUHG
3.
Disconnect the plug from the power source
before making any adjustments, changing
accessories, or storing power tools.
6XFKSUHYHQWLYHVDIHW\PHDVXUHVUHGXFHWKH
ULVNRIVWDUWLQJWKHSRZHUWRRODFFLGHQWDOO\
4.
Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions
to operate the power tool.
Power tools are
dangerous in the hands of untrained users.
5.
Maintain power tools. check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool’s operation. If damaged, have the
power tool repaired before use.
Many accidents
DUHFDXVHGE\SRRUO\PDLQWDLQHGSRZHUWRROV
6.
Keep cutting tools sharp and clean.
3URSHUO\
PDLQWDLQHGFXWWLQJWRROVZLWKVKDUSFXWWLQJHGJHV
are less likely to bind and are easier to control.
7.
Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed.
Use of the
SRZHUWRROIRURSHUDWLRQVGLIIHUHQWIURPWKRVH
intended could result in a hazardous situation.
Service
Have your power tool serviced by a qualified repair person using only identical replacement parts.
7KLVZLOOHQVXUHWKDWWKHVDIHW\RIWKHSRZHUWRROLVPDLQWDLQHG
percussion Hammer Safety Warnings
1.
Wear ear protectors.
([SRVXUHWRQRLVHFDQFDXVHKHDULQJORVV
2.
Use auxiliary handles supplied with the tool.
/RVVRIFRQWUROFDQFDXVHSHUVRQDOLQMXU\
3.
Hold power tools by insulated gripping surfaces
when performing an operation where the cutting
tool may contact hidden wiring or its own cord.
&RQWDFWZLWKDƎOLYHƎZLUHZLOOPDNHH[SRVHGPHWDO
SDUWVRIWKHWRROƎOLYHƎDQGVKRFNWKHRSHUDWRU
4.
Keep clear of moving parts.
5.
Unplug before inspecting, removing or
installing chisel, or performing any service.
6.
pull on chisel after installation and before use;
chisel may move but MUST NOT slide out.
7. Wear steel-toed boots during use.
8. Do not operate this tool if you have back, neck,
or wrist injuries, or other conditions that will
be aggravated by the severe jerking forces
that this tool exerts upon the operator.
9. Maintain labels and nameplates on the tool.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
10. Avoid unintentional starting.
Prepare to begin work before turning on the tool.
11. Do not lay the tool down until it has come to
a complete stop. Moving parts can grab the
surface and pull the tool out of your control.
12.
When using a handheld power tool,
maintain a firm grip on the tool
with both hands to resist starting torque.
13. Do not leave the tool unattended when it is plugged
into an electrical outlet. Turn off the tool, and
unplug it from its electrical outlet before leaving.
14. This product is not a toy.
Keep it out of reach of children.
15. People with pacemakers should consult their
physician(s) before use. Electromagnetic fields in
close proximity to heart pacemaker could cause
pacemaker interference or pacemaker failure.
In addition, people with pacemakers should:
• Avoid operating alone.
• Properly maintain and inspect to avoid
electrical shock.
• Properly ground power cord. Ground Fault Circuit
Interrupter (GFCI) should also be implemented
– it prevents sustained electrical shock.
