BaudTec t263r1u, Quick Installation Manual

Page: 5 / 16

ComTW263R4
4
ADSL2+ Router
Connection of ADSL2+ Router
If you have an ISDN telephone line connected the router as shown below:
(Annex-B ADSL2+ Router)
**Use the “ATF057” Annex-B Splitter (Optional)
1. Connect the supplied RJ45 Ethernet cable from your PC's Ethernet
port to the ADSL2+ Router's “LAN” Port.
2. Connect the supplied RJ11 telephone cable from your home's
telephone jack to the “LINE” port of the
supplied ATF057 splitter.
Connect the other supplied RJ11 telephone cable to the “MODEM”
port of the splitter and connect the other end of this cable to the “LINE”
port of your ADSL2+ Router.
3. Connect a RJ11 telephone cable to the “PHONE” port of the splitter
and connect the other end to the telephone input.
4. Connect the power adapter to the power inlet (PWR) of the ADSL2+
Router and turn the “SW” switch of your ADSL2+ Router on.