SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD
- 8 -
3. After finish the testing or when the unit is unused, please cover the dust-proof cap to
ensure the optical interface is clean and to avoid measurements errors caused by dust.
4. Push/pull the fiber-optic connectors carefully to avoid the scratches on the interface.
5. Handle with care to prevent equipment from falling and collision
。
Troubleshooting
Problem
Possible cause
Solution
No display on the LCD or
unable to power on the
tester
Power Off
Lower Battery
Press“
” to turn on
Change the battery
Auto power off after
power on
Lower Battery
Automatic shutdown is set
Change the battery
Check product automatic shutdown
Settings
Inaccurate measurements
or unstable
Optical interface is not clean
Improper fiber connection
Clean the fiber optic interface
Reconnect the fiber
Quality Insurance
Caution: Repair it in the field is NOT recommended.
1) We warrants that
PON Optical Power Meter
will be free from defects in material and
workmanship for a period of
18 months.
The date will be started from the date of goods
receiving by original customer.
2)This warranty is limited to defects in workmanship and materials and does not cover
damages from accident, acts of god, neglect, wrong usage or abnormal conditions of
operation.
3)We will charge corresponding fees for the cost of materials, repair and shipping in
conditions of below:
Defects occurred under normal use and service but out of the warranty period.
Failures and damages occurred do not because of defects in material and workmanship of
products.
Failures and damages occurred because of failing to comply with the Operation Instruction
and
necessary attention.
abnormal conditions of operation or handling
：
Such as artificial damage, or operating in abnormal conditions of like high temperature
、