11
GB
Battipav srl
“ORIGINAL INSTRUCTIONS”
SRS PHASE ADVISOR ART. 90451
Electrical power
3 F + N + T
400V 50/60Hz
CAUTION
THE AUTOMATIC SYSTEM OF THE CORRECT
SENSE OF ROTATION OF THE TOOL IS DESIGNED
ONLY FOR USE ON THE BUILDING SAWS MODEL
BATTIPAV-EXPERT 500/600/700 AND PRIME
650/700. THE MANUFACTURER DECLINES EVERY
RESPONSIBILITY FOR THE USE OF SRS PHASE
ADVISOR IN APPLICATIONS DIFFERENT FROM
THOSE INDICATED.
EMPLOYMENT
CAUTION
The component “SRS PHASE ADVISOR” is an
automatic system able to control the correct
direction of rotation of the tool. In case of an
inverted direction of rotation, the machine does not
start and a loudness of acoustic signal warns about
the wrong conduction.
IN CASE OF ACOUSTIC SIGNALS
1
1. Disconnect the machine power cable
2
2. Rotate with the aid of a screwdriver, two
phases inside the machine plug.
3
3. WAIT 30-60 seconds to let RESET the
SYSTEM
4. Re-connect the power cable of the machine.
PRECAUTIONS
CAUTION
• To avoid false signals, insert and unplug the
power cable several times before doing the
inversion of the phases.
• At the first start up before making operating the
machine, check the correct system operation
without tools, to become familiar with the
procedures of use.
• Always check the correct sense of the tool
rotation.
INSTALLATION
LET INSTALL THE SRS ADVISOR ONLY BY
QUALIFIED PERSONNEL.
FOR MODELS EXPERT 500/600
For a correct installation of the SRS accessory,
proceed as follows:
4
• Remove the disc guard
• Remove the cutting disc as indicated in the
User manual attached to the machine (photo
4 of the manual art. 96134).
5
• Remove the water pipe from the valve
interception.
6
• Remove the tie-fixing screw of the disk guard
and rotate the latter so to release the fixing
zone of the closing metal sheet of the motor
head.
8
• Unscrew the locking screws of the metal sheet
which close the motor head and remove it.
9
• Prepare the supplied terminal on the cables of
the SRS with the help of the scheme in photo
9.
9
THE SRS PHASE ADVISOR IS PROVIDED
WITH THE CONNECTING CABLES WITHOUT
TERMINALS. FOR MOUNTING ON EXPERT
500/600 APPLY THE TERMINALS SUPPLIED IN
EQUIPMENT AS FROM TABLE 1 AND DIAGRAM
OF PICTURE 9.
7
Summary of Contents for 90451
