Baton EVPOS-1TACA, Owner'S Operating Manual

Page: 4 / 60

Structure
1.3
1.3.1 Specification
1.3.2 Standard Accessories 1.3.3 POS for ACA series Structure
Figure: 1.3-1 Figure: 1.3-2
Part Name Quantity
Pedal Switch 1
Welder start wire 1
Table
Controller
Angle limit switch adjustment unit
Rotation gearbox of table
Angle labelling
Page 2
Specification
Power
Table rotate motor
Capacity
Eccentricity
Center of Gravity
Table Dia.
Spindle Thru Hole
Table speed
Table angle
Table angle speed
Table angle motor
Table angle lock
Table rotate control
OverLap timer(Fixing point)
Timer (Fixing point)
Lap well timer (Fixing point)
Start / Crater arc timer
Arc way of the welder
Welding current
Table rotate control
Remote control
EVPOS-1TACA
V1:AC 220V / 20A / 50;60Hz / 3Ø
V2:AC 380V / 18A / 50Hz / 3Ø
DC 180V / 400W
1000Kg.
300mm.
300mm.
900mm.
120mm.
0.05-0.5 RPM
0° - 135°
55
! sec / 135°
AC 0.5HP
Motor brake
inch / Hold / Overlap / Timer
0 - 99.9sec(display unit : 0.1sec)
0 - 999sec(display unit :1sec)
0 - 99.9sec(display unit : 0.1sec)
0 - 99.9sec(display unit : 0.1sec)
Standard
(2 cycle) /
Cater
(4 cycle)
1000A / 100%
Pedal switch(The wire is 4M Cable)
Control line(The wire is 4M Cable)
Specification