batmatic
CB1450
June 2008 R03
- 7 -
OPERATION
CHECKS BEFORE STARTING
•
Before start using compactor, carefully read instruction manual.
•
Engine oil level
Check oil level using the proper dipstick. If necessary refill with SAE 15 W 40 oil.
•
Air filter
Check that air filter is clean and in good condition. If necessary clean or replace it.
•
Fuel
Never use oil/gasoline mixture or dirty fuel. Avoid getting dirt, dust or water into fuel tank.
Refuel avoiding leaks on engine.
ENGINE STARTING (MANUAL)
•
Open the fuel valve.
•
Move the throttle lever to 3/4 position.
•
Turn the choke lever (if present).
•
Turn the engine switch on the ON position.
•
Pull the starter grip lightly until resistance is felt, then pull briskly.
Pull hand crank until it starts, in order to avoid counterblows
•
As the engine warms up, gradually move the choke lever (if present).
•
Warm up the engine at the minimum speed for some minutes.
•
The compactor will start moving when the throttle lever is in operative position.
ENGINE STOPPING (MANUAL)
•
Move the throttle lever to the minimum position. Warm up the engine at the minimum speed
for some minutes.
•
Turn the engine switch on the OFF position.
WARNING
Never operate the engine switch when the engine is at the maximum speed.
•
Turn the fuel valve on the OFF position.
ENGINE OIL
•
Check oil level using the proper dipstick, if necessary refill with SAE 15 W 40 oil.
Oil change
•
Drain oil at warm engine.
•
Refill with SAE 15W40 oil.
WARNING
Only use oil with characteristics advised by the manufacturer engine (see
engine book).
Summary of Contents for CBH1450
