8
S p e c t r u m 6 2 0 - W & 6 2 6 - W
Installation - Himalayan Salt Panel (Dimming (Phase 1))
Installation - Himalayan Salt Panel (Dimming (Phase 1))
1. Determine the desired
locations for the following:
DMX Enclosure (G) and Salt
Panel Assembly (A).
Note:
DMX Enclosure (G) must be
in an accessible, dry location.
Provided cord lengths are 50’
maximum.
Note:
Himalayan
Salt Panel Assembly (A) can be
recessed or surface mounted.
2. Install electrical boxes for the
following: DMX Enclosure (G)
(power), DMX Enclosure (G) (to
salt) and Salt Panel Assembly
(A).
3. Run a 120VAC externally
switched GFCI outlet to power
electrical box supplying power
to DMX Enclosure (G). This
power source will be controlled
by the Dimmer (F).
4. Route Light Extension Cable (E)
from DMX Enclosure (G) to Salt
Panel Assembly (A).
5. Connect the DMX Enclosure (G)
to Light Extension Cable (E).
