Batca LD-3, Owner'S Manual, Page: 19 / 23

www.batcafitness.com
19
LD-3 Owner’s Manual
Final Assembly and Troubleshooting

Position the cable guard tab on the
Pulley Cover so that the tab
prevents the cable from coming out
of it’s track on the 4 1/2” Pulley. An
example of this positioning can be
seen in the figure to the left. The
cable guard tab should be positioned
so that it is in the middle of the cable
wrap on the 4 1/2” Pulley, between
points “A” and “B”. This will allow
better protection and prevent the
cable from rubbing the cable guard
tab. Refer to Step 7 and 7a.
Top Plate
200lb Stack (Standard)
Weight Stack Decals:
IMPORTANT - Check These Components Before Using Gym:

Each Cable with a threaded bolt on either end must be
threaded at least 1/2” into its attachment, whether it be a
Free Floater, Lockout Free Floater, or the Top Plate of the
weight stack. Each must also be secured with a 1/2” Jam Nut
to ensure a safe and proper connection.

Record your serial number on the front of this manual
and keep for your records. The serial number can be
found on the side of the cage as seen in the figure to the
left.
Guide Rod
Lubrication
:

Clean guide rods with a lint-free cloth and apply a thin layer of silicone lubricant (Part # BFH-
50262) to each guide rod. This will ensure a glass smooth performance from your weight stack.
Free Floater
Pulley Cover
BFM-50345