Batca Fitness Systems
4
AXIS Dip/Plyo Platform Owner's Manual
PLEASE FOLLOW ALL DIRECTIONS VERY CAREFULLY FOR PROPER INSTALLATION.
THE AXIS DIP/PLYO PLATFORM CAN BE MOUNTED IN BETWEEN ANY COMBINATION OF AT
LEAST TWO MODULAR AXIS UNITS (AXIS FREE TRAINER, AXIS BODY WEIGHT STATION, AXIS
SMITH MACHINE, OR AXIS SQUAT RACK). AT LEAST TWO MODULAR UNITS MUST BE
PURCHASED INORDER TO INSTALL AXIS DIP/PLYO PLATFORM.
Step 1:
Note: Please Position Hardware in the same direction as shown in the figure. This will
make future steps easier to assemble
All Flat Washers and Nylocks are 3/8” unless otherwise noted.
Anywhere a washer is against the
round side of a tube there is to be a
3/8” CURVED WASHER
instead of a
3/8” FLAT WASHER.
Please Tighten Bolts before moving to next step.
Part #
Description
Qty
BFM-11118 Dip/Plyo Platform Crossmember A 1
BFM-11122 Dip/Plyo Platform Crossmember B 1
BFP-51753
SHCS 3/8” x 4 3/4”
8
BFH-50204
3/8” Curved Washer
16
BFH-50157
3/8” Nylock
8
Please Note that the
position of the curved
plates where the Selector
Assembly will be mounted
in the next step. If it is
being connected to the
AXIS Smith Machine or the
AXIS Squat Rack, the
Selector Assembly should
always be positioned away
from the Olympic Bar of
those Stations (As shown in
illustration)
4 3/4”
Dip/Plyo Platform
Crossmember B
Dip/Plyo Platform
Crossmember A
