English
6
• When working with the multi saw and
the extension pole, always wear safety
glasses and gloves. Wear a safety hel-
met when working with the multi saw,
where head injuries are to be expected.
• To avoid damage to your hearing,
always wear hearing protection.
•
Always wear cut-proof and tight-fitting
clothes and safety boots.
3.
Before first use
Remove the accessory from the packaging.
Check the machine for transport damage
and do not use the accessory in case of
damages. Keep the packing materials away
from children, risk of suffocation!
4. Contents of packing
1x Extension pole
1x Instruction manual
5. Intended use
The extension pole is designed for extend-
ing the reach of the multi saw. The equip-
ment is to be used only for its prescribed
purpose.
6. Operation
6.1
Slide the multi saw into the extension
pole.
6.2
Hook the bracket into the saw and fold
the lever down to secure the multi saw
and the extension pole together.
6.3
To remove the multi saw, lift up the
bracket and pull out the saw from the
extension pole.
6.4
Attach both components of the exten
-
sion pole together and tighten the
screw cap by turning it counter clock
-
wise onto the thread. Only hand- tight
the screw cap.
6.5
Insert the battery into the extension
pole.
6.6
To switch on the saw, first depress the
safety switch
(1)
and then press the on/
off trigger switch
(3)
on the handle. To
switch off the multi saw, release the
trigger.
6.7
Please observe the manual of the multi
saw.
7. Accessories
Use only accessories with an allowable
speed matching at least the highest no-load
speed of the tool.
8. Maintenance and cleaning
WARNING:
Always disconnect from the
mains power supply, before carrying out any
maintenance/ cleaning of the charger.
Remove the battery before carrying out any
maintenance/cleaning of the tool.
8.1
Cleaning
• Clean the extension pole with a dry or
lightly moistened cloth only. Keep the
contacts free from dust and dirt.
• Keep safety devices, ventilation open-
ings and the motor housing as free as
possible from dirt and dust. Rub the
electric power tool with a clean cloth or
blow over it with low pressure com
-
pressed air.
• We recommend that you clean your
electric power tool immediately after
each use.
• Clean the electric power tool regularly
with a damp cloth and somewhat soft
soap. Do not use any cleaning or sol-
vent materials; these can attack the
device’s plastic components. Make sure
that no water can get inside the electric
power tool.
8.2
Maintenance
There are no inner parts of the tool which
need maintenance.
Store the extension pole and the multi saw
always out of reach of children and persons
in need of supervision.
7063826-Extension-pole-Nexxsaw-V2-Ma-2011-17.indb 6
7063826-Extension-pole-Nexxsaw-V2-Ma-2011-17.indb 6
01-07-2021 14:08
01-07-2021 14:08
