BAT LOGIC ErgAdaptor Fitment Manual Download Page 2

WWW.BATLOGIC.NET 

FOR FURTHER INFORMATION  

PLEASE VISIT OUR WEBSITE

ErgAdaptor

FITMENT GUIDE

Attach your BasePlates to the ErgAdaptor with the screws, washers and nuts provided.  
Or attach your rowing shoes directly if you are not using the QuickRelease System. The 
washers should go between the screws and the back of the ErgAdaptor plate. You can select 
your desired height by sliding the BasePlates up or down the Adaptor slots. 

RECOMMENDED HEIGHT: 

This should be set to your comfort, the middle 5 

notches on the Adaptor match the 5 height settings 

on the Concept 2. Next, if needed, screw your rowing 

shoes (and CustomPack if used) to your ShoePlate 

Tops using the 8x8mm T-head screws supplied with the 

ShoePlate Tops. Don’t use counter sunk screws to fit the 

shoe to your ShoePlate Tops and do not over tighten 

(hand tight or max 5Nm).

STEP 1 – ATTACH YOUR BASEPLATES

Remove the adjustable Concept2 heel cups from the ergo. This can be fiddly the first time. If you push down on the toe of them with your 
palm and pull the heel at the same time they come out quickly and easily. You will not break them and they are simple to clip back in. Finally, 
pull the Concept2 straps tight as shown, to ensure the buckles and straps sit neatly.

STEP 2 – REMOVE THE HEEL CUPS

Place the ErgAdaptor on the ergo, connect the straps around the back of the Concept2 ergo foot box as shown, with the clip and hook. Give the straps

a strong pull making sure there are no twists.

STEP 3 – ATTACH YOUR ERGADAPTOR TO THE CONCEPT2

Line up each ShoePlate Top with the release tab of the BasePlate and place on top of the BasePlate. Slide the ShoePlate Top upwards to engage into 

the BasePlate, you should hear a click. Once engaged you should check the release tab on the ShoePlate Top is fully depressed by pushing down on it, 

this ensures a proper locked fitment. To remove simply lift the tab on the ShoePlate Top and pull the plate downwards.

To remove the ErgAdaptor, simply unclip the straps and lift off the ergo, then refit the heel cups.

STEP 4 – CLICK IN YOUR SHOEPLATE TOPS

Reviews: