3.4.3. Tracking Adjustment
:
Tracking behavior of all electric caddies is strongly dependent on equal weight distribution and slope. Test
your caddy’s tracking by operating it on an even surface without the bag. If changes are necessary you can
adjust the tracking of your caddy by loosening the front wheel axle and the adjustment bar on the right
side of the front wheel and shifting the axle accordingly. After adjustment fasten screws in reverse order.
3.5. Electronic Systems
Remote Control Range
: We recommend not to exceed 50 yards distance. The greater the distance
between you and caddy, the greater the chance of losing contact with it
Microcomputer
: The remote caddy has 3 microcomputer controls: The first is in main controller box.
The second is in the remote control handset, and the third is in the handle.
Safety Protection
: When the temperature of the controller box reaches its upper limit in case of an
overload it will automatically shut down to cool off.
Microprocessor Controlled Electronics System
: When you connect the battery, the electronics
system will automatically run through a start-up routine. Then you can press the main OFF/ON switch
on the handle. The battery charge indicator lights will show you the charge level of the battery from
green (fully charged) to red (discharged).
Important:
The electronics controller box contains no user serviceable parts. Therefore, it is sealed to
reduce the risk of moisture entering and impacting the electronic system. Breaking this seal increases
the risk of damaging the electronics and decreasing the reliability of your caddy.
DO NOT
attempt to
open the controller case.
Doing so will void the warranty
!
Battery Operation and Care
: Follow battery charge and maintenance instructions. The battery comes
with leads and connector and a 30 or 40 Ah fuse.
Page 9 of 16
