! POWER !
Before connecting the ribbon cable to this module, disconnect your
system from power! Double check polarity of the ribbon cable and
that it is not shifted in any direction. The red cable should match
the -12V rail, both on the module and on the bus board.
! PLEASE MAKE SURE OF THE FOLLOWING
you have a standard pinout eurorack bus board
you have +12V and -12V rails on that bus board
the power rails are not overloaded by current
Although there are protection circuits in this device, we do not take
any responsibility for damage caused by the wrong power supply
connection. After you connected everything, double-checked it and
closed your system, so no power lines can be touched by hand,
turn on your system and test the module.
FOLLOW
FAST
MID
SLOW
STEREO
CUTOFF
+
RESONA
NC
E
LEFT FILTER
LP
HP
LP
HP
VCA CV
L IN
R IN
L OUT
(
MONO
)
R OUT
BEYOND
V/OCT
+
MOD
SPREAD
PAN
MOD
RIGHT FILTER
INVERTER
INVERTER
+
-
+
VCA
VCA
