9
bassboss.com
bassboss.com
4-7
BROWNOUT AT POWER-UP: Amp shuts down. Power cycle to restore. Check supply voltage.
4-8
UNABLE TO START AMPLIFIER: Power Cycle to restore. Check or eliminate power conditioner.
5-0
OVER-VOLTAGE: Amp turns off or won’t start. (Seen on 120V versions when connected to 240V outlets.)
6-0
UNDER-VOLTAGE: Amp turns off or won’t start. (Seen when Generators are overdrawn or long extension
cords are in use.)
6-6
LINE LIMTER ACTING: Amp still runs. Output reduced to limit current draw.
Need more assistance? Support is available via phone or email. Email: family@bassbo ss.com Phone: 855-822-7770 toll free
Safety Information:
Important information regarding safety and the use of your loudspeakers:
Never stand in the immediate vicinity of loudspeakers driven at a high level. Professional loudspeaker systems are capable of
causing a sound pressure level detrimental to human health. Seemingly non- critical sound levels (from approx. 95 dB SPL) can
cause hearing damage if people are exposed to it over a long period. To prevent potentially dangerous exposure to high levels of
acoustic pressure, anyone who is exposed to these levels should use adequate protection devices.
When a transducer capable of producing high sound levels is being used, it is necessary to wear ear plugs or protective
earphones. See the manual technical specifications to know the maximum sound pressure level.
In order to prevent accidents when setting up the loudspeakers or loudspeaker stands, make sure they are standing on a firm
surface.
Ensure that all additional hardware, fixings and fasteners used for installation or mobile deployment are of an appropriate size
and load safety factor.
Pay attention to the manufacturers’ instructions and to the relevant safety guidelines.
Regularly check the loudspeaker housings and accessories for visible signs of wear and tear, and replace them when necessary.
Regularly check all load bearing bolts in the mounting devices.
Caution: Loudspeakers produce a static magnetic field even if they are not connected or are not in use. Therefore make sure when
erecting and transporting loudspeakers that they are nowhere near equipment and objects which may be impaired or damaged
by an external magnetic field. A distance of 3 feet (1m) should be maintained between loudspeakers and sensitive equipment
such as CRT monitors or magnetic storage media.
Never attempt to carry out any operations, modifications or repairs that are not expressly described in this manual.
Contact your dealer or BASSBOSS support if the product is not functioning properly.
BASSBOSS strongly recommends this product be installed by a qualified, professional installer who can ensure correct installation
and certify that it is installed in compliance with the regulations in force.
The entire audio system must comply with the current local standards and regulations regarding electrical systems.
To prevent the occurrence of noise on signal cables, use shielded cables only. Avoid routing signal cables close to equipment that
produces high-intensity electromagnetic fields such as transformers, power cables and loudspeaker wires. Do not coil excess power
cable. Do not coil or wrap power cables and signal cables together.
Important Notes: