Basler L800k, User Manual, Page: 42 / 168

Operation and Features
3-2 BASLER L800
k
Draft
Figure 3-1:
L800
k
Sensor Architecture
3.2 Line Rate
The camera’s maximum achievable line rate depends on the following factors:
• Video data output mode (Section 3.3 )
• Exposure time (Section 3.4 )
• Use of two-line averaging (Section 3.9.4 )
L
For single and dual video data output mode the digitized pixel data is reordered in
the camera’s FPGA so that the pixels will be transmitted from the camera in se-
quential order from pixel 1 through pixel 8160.
For dual separated video data output mode the pixel data is directly transmitted
from the camera without reordering. For details of the video data sequence see
section
2.5.5.3 .