
Operation and Features
BASLER L800
k
3-3
Draft
3.3
Video Data Output Modes
L800
k
cameras can output video data in six different modes:
• Single 8 bit mode
• Single 10 bit mode
• Dual 8 bit mode
• Dual 10 bit mode
• Dual separated 8 bit mode
• Dual separated 10 bit mode
These modes of operation are described in detail in Section
.
3.3.1 Setting the Video Data Output Mode
You can set the video data output mode with the Camera Configuration Tool Plus (CCT+) or by
using binary write commands from within your own application to set the camera’s control and
status registers (CSRs).
With the CCT+
With the CCT+ (see Section
), you use the Video Data Output Mode parameter in the Output
Mode parameters group to set the output mode.
By Setting CSRs
You select the video data output mode by writing a value to the Mode field of the Video Data
Output Mode CSR (see page
).
See Section
for an explanation of CSRs and Section
for an explanation of using read/
write commands.
3.3.2 Changes to the Maximum Line Rate
The video data output mode has an effect on the camera’s maximum achievable line rate.
See Sections
and
Summary of Contents for L800k
