Basler L800k, User Manual, Page: 11 / 168

Introduction
BASLER L800
k
1-1
Draft
1 Introduction
1.1 Document Applicability
This User’s Manual applies to
L800
k
cameras with a camera version ID number of 05.
Cameras with a lower or a higher ID number may have fewer features or have more features than
described in this manual. Features on cameras with a lower or a higher ID number may not
operate exactly as described in this manual.
An easy way to see the camera version ID number for an
L800
k
camera is by using the CCT+. To
see the camera version ID number:
1. Double click the CCT+ icon on your desktop or click Start
⇒
All Programs
⇒
Basler Vision
Technologies
⇒
CCT+
⇒
CCT+. The CCT+ window will open and the software will connect
to your camera.
2. Scroll down until you find the
“Camera Information” group
heading. If there is a plus sign
beside the Camera
Information group heading,
click on the plus sign to show
the list of parameters in the
group.
3. Find the parameter called
“Camera Version.” As shown
in Figure 1-1, the last two
numbers of this parameter are
the camera version ID
number.
L
You can also access the camera version ID number by using binary commands to
read the Camera Version Inquiry register. (See Section
4.2.1 for an explanation of
inquiry registers and Section 4.3 for information on using binary commands.
This is the
camera
version
ID
Figure 1-1: CCT+ Window