Pole Mount Kit Installation Guide
Basler IP Fixed Dome Camera
5
4. Refer to the exploded drawing below, and place the bracket arm gasket on the back of the
bracket arm. Route the cables through the bracket arm and then attach the bracket arm to the
adapter plate using three M5 x 20 screws.
5. Apply the camera adapter seal to the camera adapter (the seal is a peel-and-stick type).
6. Route the cables through the camera adapter and then attach the camera adapter to the
bracket arm using four M4 x 10 screws.
7. Attach the dome camera base to the camera adapter using three M4 x 10 screws.
Bracket
Arm
Bracket
Arm
Gasket
Camera
Adapter
Camera
Adapter
Seal
M5 x 20
Screw
(x 3)
M4 x 10
Screw
(x 3)
M4 x 10
Screw
(x 4)
Dome
Dome
Camera
Base
Adapter
Plate