Basler BE1-24, Instruction Manual

Page: 15 / 43

1-10 BE1-24 General Information
Push-To-Energize-Output Accessible with a thin non-conducting rod through the front panel,
Pushbuttons push-to-energize pushbuttons are available to energize each output
relay for testing the external control/protective system wiring.
Shock In standard tests, the relay has withstood 15 g in each of three
mutually perpendicular axes without structural damage or
degradation of performance.
Vibration In standard tests, the relay has withstood 2 g in each of three
mutually perpendicular axes swept over the range of 10 to 500
hertz for a total of six sweeps, 15 minutes each sweep, without
structural damage or degradation of performance.
Isolation In accordance with IEC 255-5 and ANSI/IEEE C37.90, one minute
dielectric (high potential) tests as follows:
All circuits to ground: 2121 Vdc
Input to output circuits: 1500 Vac or 2121 Vdc
Surge Withstand Capability Qualified to ANSI/IEEE C37.90.1-1989, Standard Surge Withstand
Capability (SWC) Tests for Protective Relays and Relay System,
and IEC 255-5,
Impulse Test and Dielectric Test.
Impulse Test Qualified to IEC 255-5.
Radio Frequency Maintains proper operation when tested in accordance with IEEE
Interference (RFI) C37.90.2-1987
Trial-Use Standard Withstand Capability of Relay
Systems to Radiated Electromagnetic Interference from
Transceivers.
UL Recognition UL Recognition per Standard 508, UL File No. E97033. Note:
Output contacts are not UL Recognized for voltages greater than
250 volts.
Temperature
Operating
-40
(
C (-40
(
F) to +70
(
C (+158
(
F)
Storage
-65
(
C (-85
(
F) to +100
(
C (+212
(
F)
Weight 17.3 pounds maximum
Case Size All relays are supplied in a M1 double-ended case.