Basler A102K, User Manual, Page: 18 / 133

Camera Interface
2-2 BASLER A102
k
DRAFT
2.1.2 Pin Assignments
26-Pin MDR Connector
The pin assignments for the 26 pin, MDR connector used to transmit video data, control signals,
and configuration commands are shown in Table 2-1.
Pin
Number
Signal
Name
Direction Level Function
15 Tx X0+ Output Camera Link
LVDS Data from Camera Link Transmitter
2 Tx X0-
16 Tx X1+ Output Camera Link
LVDS Data from Camera Link Transmitter
3 Tx X1-
17 Tx X2+ Output Camera Link
LVDS Data from Camera Link Transmitter
4 Tx X2-
19 Tx X3+ Output Camera Link
LVDS Data from Camera Link Transmitter
6 Tx X3-
18 Tx Clk+ Output Camera Link
LVDS Clock from Camera Link Transmitter
5 Tx Clk-
12 CC4+ Input RS-644
LVDS Reserved for Future Use
25 CC4-
24 CC3+ Output RS-644
LVDS Integrate Enabled
11 CC3-
10 CC2+ Input RS-644
LVDS Reserved for Future Use
23 CC2-
22 CC1+ Input RS-644
LVDS External Trigger
9 CC1-
21 Output RS-644
LVDS Serial Communication Data Transmit
8 SerTFG-
7 SerTC+ Input RS-644
LVDS Serial Communication Data Receive
20 SerTC-
1, 13,
14, 26
[1]
DC Gnd
Input Ground DC Ground
[1]
Pins 1, 13, 14, and 26 are all tied together inside of the camera.
Table 2-1:
A102
k
Pin Assignments for the 26-pin MDR Connector
L
The camera housing is not grounded and is electrically isolated from the cir-
cuit boards inside of the camera.