Basler A102K, User Manual, Page: 17 / 133

Camera Interface
BASLER A102
k
2-1
DRAFT
2 Camera Interface
2.1 Connections
2.1.1 General Description
The
A102
k
is interfaced to external circuitry via two connectors located on the back of the camera:
• a 26 pin, .050” Mini D Ribbon (MDR) female connector used to transmit video data, control
signals, and configuration commands.
• a 6 pin, micro-miniature, push-pull receptacle used to provide power to the camera.
A status LED located on the back of the camera is used to indicate power present and signal
integrity. Figure 2-1 shows the connectors and the LED.
Figure 2-1:
A102
k
Connectors and LED
Micro-miniature
6 Pin Receptacle
26 Pin Female
MDR Connector
LED